Accessibility navigation

In the following section you may be asked to change some of you computer settings. You must write down your original settings before you change anything.

  1. For Windows 7/Vista: press the <Windows> key and ‘R’ together.

    For Windows XP: click on Start and select Run

  2. In the Open: box, type ‘cmd’ then click on OK

    cmd

  3. At the command prompt, type ‘ipconfig/all’ and then press <Enter>.  You should now see a screen that is similar to the one below:


    ipconfig

  4. The IP address, Default gateway, DHCP Servers and DNS Servers shown on this command prompt should all begin with 134.225 (must be ethernet adapter and not wireless). You may need to scroll up to see the ‘Ethernet Adapter Local Area Connection’ section: if this is not the case then you should refer to Configuring your network settings on Page 8.   Configuring your machine.

    If you do not see a similar screen then you may not have a network card installed, or it is not configured correctly. Please refer to your computer documentation to confirm that you have a network card installed.   Please note the physical address for reporting problems to readingConnect.

  5. If you see any other screen then please proceed with the section Configuring your machine.

Page navigation

Additional Information

 

Search Form